Mustang 86 - Mach1 Springs

1986 Mustang
Mach1 Springs, Steeda 1/4" front spring spacers (placed on top of the isolator),
BBK poly top & bottom isolators, new Fox FCAs,
Tokico 5-way adjustable struts (set on 4 out of 5).

The front fenders sit ~26-7/8" from the ground
and that's with 245/45/17 RE730s (@32 PSI) which are the correct diameter for the car.
The Mach1 springs are rated at 600lbs/in vs the 425/530 lbs/in stock GT springs.

Also: MM Caster Camber plates, MM bumpsteer kit,
STB, subframes, M2300K Cobra brake kit, ABS, SS brake hoses,
poly swaybar end-link bushings, poly swaybar bushings, heavy swaybar end-links, etc.
Here are some pictures of the install with the Mach1 springs, Steeda spacer, and new FRPP FCAs.

10-04-2007
Warner NH

Click on a thumbnail for a larger picture.

Mustang-86-Mach1spings-10-2007Pic_01	Mustang-86-Mach1spings-10-2007Pic_02	Mustang-86-Mach1spings-10-2007Pic_03	Mustang-86-Mach1spings-10-2007Pic_04
Mustang-86-Mach1spings-10-2007Pic_05	Mustang-86-Mach1spings-10-2007Pic_06	Mustang-86-Mach1spings-10-2007Pic_07	Mustang-86-Mach1spings-10-2007Pic_08
Mustang-86-Mach1spings-10-2007Pic_09	Mustang-86-Mach1spings-10-2007Pic_10	Mustang-86-Mach1spings-10-2007Pic_11	Mustang-86-Mach1spings-10-2007Pic_12
Mustang-86-Mach1spings-10-2007Pic_13	Mustang-86-Mach1spings-10-2007Pic_14	Mustang-86-Mach1spings-10-2007Pic_15	Mustang-86-Mach1spings-10-2007Pic_16